ISO 1172:1996
Textile-glass-reinforced plastics-Prepregs，moulding compounds and laminates-Determination of the textile-glass and mineral-filler content-Calcination methods
ISO 1887：1995
Textile glass-Determination of combustible-matter content
ISO 1888:1996
Textile glass-Staple fibres or filaments-Determination of average diameter
ISO 1889:1997
Reinforcement yarns-Determination of linear density
ISO 1890:1997
Reinforcement yarns-Determination of twist
ISO 2078:1993
Textile glass-Yarns-Designation
ISO 2113:1996
Reinforced fobres-Woven fabrics--Basis for a speciation
ISO 2558:1974
Textile glass chopped-strand mats for reinforcement of plastics-Determination of time of dissolution of the binder in styrene
ISO 2559:1991
Textile glass-Mats(made from chopped or continuous strands )-Basis for a specification
ISO 3341:2000
Textile glass-Yarns-Determination of breaking force and breaking elongation
ISO 3342:1995
Textile glass-mats-Determination of tensile breaking force
ISO 3343:1984
Textile glass-Yarns-Determination of twist balance index
ISO 3344:1997
Reinforcement products-Determination of moisture content
ISO 3374:2000
Reinforcement products-mats and fabrics-Determination of mass per unit area
ISO 3375:1975
Textile glass-Determination of stiffness of rovings
ISO 3579-1:1993
Textile-glass-reinforced plastics-Determination of mechanical properties on rods made of roving-reinforced reisn
Part 1: General considerations and preperation of rods
ISO 3579-2:1993
Textile-glass-reinforced plastics-Determination of mechanical properties on rods made of roving-reinforced reisn
Part 2: Determination of flexural strength
ISO 3579-3:1993
Textile-glass-reinforced plastics-Determination of mechanical properties on rods made of roving-reinforced reisn
Part 3: Determination of compressive strength
ISO 3579-4:1993
Textile-glass-reinforced plastics-Determination of mechanical properties on rods made of roving-reinforced reisn
Part 4: Determination of apparent interlaminar shear strength
ISO 3616:1977
Textile glass-mats-Determination of average thickness，thickness under load and recovery after compression
ISO 4604:1978
Textile glass-Woven fabrics-Determination of conventional flexural stiffness-Fixed -angle flexometer method
ISO 4899:1993
Textile-glass-reinforced thermosetting plastics-Properties and test methods
ISO 4900:1990
Textile glass-Mats and fabrics-Determination of contact mouldability
ISO 9163:1996
Textile glass-Rovings-Manufacture of test specimens and retermination of tensile strength of impregnated rovings
ISO 9291:1996
Textile-glass-reinforced plastics-Rovings-Preparation of unidirectional plates by winding
ISO 10122:1995
Reinforced materials-Tubular braided sleeves-Basis for a specification
ISO 10352:1997
Fibre-reinforced plastics-Moulding compounds and prepregs-Determination of mass per unit area
ISO 10371:1993
Reinforced materials-Braided tapes-Basis for a specification
ISO 10548:1994
Carbon fibre-Determination of size content
ISO 11566:1996
Carbon fibre-Determination of the tensile properties of single -filament specimens
ISO 11567:1995
Carbon fibre-Determination of filament diameter and cross-sectional area
ISO 11667:1997
Fibre-reinforced plastics-Moulding compounds and prepregs-Determination of resin，reinforced-fibre and mineral-filler content-Dissolution methods
ISO 12114:1997
Fibre-reinforced plastics-Thermosetting moulding compounds and prepregs-Determination of cure characteristics
ISO 12115:1997
Fibre-reinforced plastics-Thermosetting moulding compounds and prepregs-Determination of flowability，maturation and shelf life
ISO 13002:1998
Carbon fibre-Designation system for filament yarns
ISO 14125:1998
Fibre-reinforced plastic composites-Determination of flexural properties
ISO 14126:1999
Fibre-reinforced plastics composites-Determination of compressive properties in the in-plane direction
ISO 14129:1994
Fibre-reinforced plastic composites-Determination of the in-plane shear stress/shear strain response，including the in-plane shear modulus and strength，by the ±45。tension test method
ISO 14130:1997
Fibre-reinforced plastics composites-Determination of apparent interlaminar shear strength by short-beam method
ISO 15034:1999
Composites-Prepregs-Determination of resin flow
ISO 15040:1999
Composites-Prepregs-Determination of gel time
ISO 15130:1999
Fibre-reinforced plastics composites-Determination of the in-plane shear modulus by the plate twist method