耐酒精PP油墨

1、油墨特性：低氣味，高光澤，遮蓋力強，過網性流平性好，耐酒精，耐汽油抗白電油，附著力好。

2、適用材料：主要應用于PP材料可達到免處理，不用表面擦PP水、也可印某些金屬PU、電鍍件表面、可絲印、可移印。

3、技術參數：

a.表干時間：自然揮發8—15分鐘；

b.細度：5UM↓ 、光澤：60°↑ ；實干時間：自然揮發8—24小時以內；

c.光澤：70°↑ ；

d.耐酒精：1000g力來回超過60次；

e.耐磨：1000g力來回超過50次；

f.過網性：40—160T。

4、稀釋劑的選擇：

a.開油水：可添加10％—20％的DB—O1固化劑使用，S—3慢干開油水，S—150中干開油水，S—240快干開油水。

b.洗網水：S—718；

c.消泡劑：PP專用消泡劑；

d.根據需要可添加劑10—20％的稀釋劑.

5、注意事項：

a. 使用前將油墨攪拌均勻,用后隨時封閉；本產品請遠離火源，需在避光環境存放；

b.對未經處理或難有附著的PP或BOPP材質,需先用PP處理劑擦拭承印物表面,在印PPY油墨；

c.施工件在施工前清除表面油漬及污物；

d. 需多色套印時應等前面的顏色表干后進行套色，如有油墨會有些發并腐蝕，建議用膠罐包裝。

e. 油墨在與固化劑配合使用時，加過固化劑的油墨應在4小時內用完，網板不用時立即清洗 ；

f.只可用本系列產品.不得將油墨與其它油墨混合及配色.調金,銀色油墨時應調好后及時使用,不能儲存。

6、應急處理措施：

a.如浸濺到眼部立即清水清洗，嚴重者就醫。

b.滅火急救措施：用干粉，泡沫滅火器或沙子滅火。

※備注：由于材料及使用中的變數，可能是結果會有變化，以上數據僅供參考，使用前請自行測試。

1, ink characteristics: low odor, high gloss, hiding power, over net, leveling, good, alcohol, gasoline, white oil, good adhesion.

2, applicable materials: mainly used in PP material, can be achieved without treatment, without surface wiping PP water, also can print some metal PU, electroplating surface, silk screen can be printed.

3, technical parameters:

A. table dry time: natural evaporation 8 - 15 minutes;

B.: 5UM:: gloss, fineness of 60 degrees up; work time: 8 - 24 hours of natural volatile;

C. gloss: 70 degrees up;

D. alcohol resistance: 1000g force more than 60 times back and forth;

E. wear: 1000g force back and forth more than 50 times;

F. over the net: 40 - 160T.

4, diluent choice:

A. open oil-water: can add 10% - 20% DB - O1 curing agent use, S - 3 slow dry open oil-water, S - 150 medium dry open oil-water, S - 240 quick dry open oil-water.

B. washing nets water: S - 718;

C. defoaming agent: PP special defoaming agent;

D. can be additive 10 - 20% diluent as required

5, matters needing attention:

A. use before mixing the ink evenly, use it at any time closed; this product away from the fire source, need to stay in the light environment;

B. for untreated or difficult to adhere to the PP or BOPP material, you need to use PP treatment agent to wipe the substrate surface, in the printing PPY ink;

C. construction parts to remove surface grease and dirt before construction;

D. multicolor printing, you should wait for the color table in front of dry color chromatography, if the ink will be some hair and corrosion, it is recommended to use plastic cans packaging.

E. ink and curing agent in use, plus the curing agent ink should be used in 4 hours, the net plate without cleaning immediately;

F. can only use this series of products. Shall not be mixed with other ink ink and color. Transfer gold, silver ink should be adjusted after the timely use, can not be stored.

6, emergency treatment measures:

A. if splashed to the eye, immediately clean water, serious medical treatment.

B. fire emergency measures: use dry powder, foam extinguisher or sand to extinguish fire.

Please note: due to the material and the use of variables that may be the result of a change, the above data for reference only, please test before use.

上海建宏刷科技有限公司是【上海凱賢】的一家下屬分公司是一家以油墨生產.印刷耗材貿易.印刷加工為一體的公司。凱賢科技公司座落在交通便利的嘉定安亭鎮，緊靠F1全部賽車場。公司占地面積10000平方米，是一家以研制、生產高品質油墨為實體，同時經營各類相關輔助器材的科工貿整體化大型企業。以ISO9001質量認證體系為基礎，以歐美EN-71PART3、日本ST-MARK、美國ASTM檢驗體系為標準，生產適用于絲印、移印、膠印、噴涂等工藝系列油墨產品，為電子電器、紡織服裝、日用制品、文體用品、包裝印刷、廣告展示、玩具業等國內外眾多行業領域的有名品牌運營商提供服務，備受著業界的信賴與推崇。凱賢科技在新時期確立了新的發展戰略，提出了“科研先導，人才運營，整合資源，創新經營”的企業經營方略。與國內外先進油墨技術研究機構建立戰略合作伙伴關系，在不斷提高完善現有產品質量的同時，致力于新產品的研制開發。

耐酒精PP油墨